Clecall Cleco Pliers
  • Home
  • Blog
  • About Us
  • Contact Us
  • Warranty

Improved Design Clecall Upright Spring Loaded Steel Cleco Pliers are in stock at Aircraft Spruce! MORE DURABLE AND LESS HANDLE COMPRESSION DISTANCE FOR EASIER CLECO ACTIVATION!

4/13/2015

 
Picture
Handle compression distance has been significantly improved. Handles don't compress as far when engaging cleco. Spring opens plier without user assistance and awkward hand movements. 

CHECK OUT OUR NEW "I'D RATHER BE BUILDING A PLANE" LINE!

1/17/2015

 
Check out our new line at Aircraft Spruce! Show off your favorite hobby!

http://www.aircraftspruce.com/menus/st/manu_idrather.html


We can also customize with your organizations logo with very low quantities!

Contact us at sales@clecall.com for more info!

Clecall Orders now fit 1/4 clecos!

12/16/2014

 

All pliers ordered after 12/3/14 will accommodate 1/4 Clecos' larger diameter bodies!

CLECALL CLECO PLIERS PRICE REDUCTION DUE TO BIGGER BATCH MANUFACTURING! JUST IN TIME FOR CHRISTMAS!

12/2/2014

 
Due to incredible support from Aircraft Spruce, we have been able to order much larger batches of the Clecall Cleco Pliers. This, of course, has reduced costs, and we want to pass that on to the consumer. As of 12/2/2014, the new price for the Cleco Pliers, has dropped to $29.95, a savings over 25 percent!

We appreciate the support so far, the sales have been brisk. 

Contact us with any questions. 

Christopher Braun
EAA Lifetime #808722

CLECALL PLIER ORDERS THROUGH SPRUCE AFTER 12/1/14

12/2/2014

 

Updated taller press piece will begin shipping 11/26!

11/25/2014

 

For those customers who elected to buy the updated press piece suggested by Viking Air, the Dehavilland Otter and Beaver manufacturer, we are pleased to announce that the parts have arrived and they will begin shipping tomorrow. I really like the way the decreased throw of the handles.

Also, ooooooooohhhhhh, the excitement in the air. A major revamp to the safety wire pliers/tool is almost finished!! We are really excited about this.

And, oh well, I guess I have to let this news out finally.....there is also a major change to the age old design of the spring loaded cleco.....yes, that's right.....a better Cleco!!!!!

DESIGN UPDATE FOR CURRENT CUSTOMERS!

11/11/2014

 
Hello!
Thanks for purchasing the Clecall Upright Cleco Pliers. We have been getting a ton of great feedback on the usability and comfort.  As part of the normal feedback, we have received one or two suggestions on small tweaks that customers might appreciate. The first, was adding spring loading to the plier. This was suggested in the beginning and we added it promptly to all tools.

Now, last week, a large aircraft manufacturer in North America, came up with a little tweak that we love. It reduces the distance it takes to compress the handle, without affecting cleco clearance. We would like to offer it existing customers at our cost, so that you can choose whether you like the original piece, or the new taller piece in the top jaw.

They suggested adding .050" in height to the steel press piece that is inserted into the top jaw of the Clecall pliers. This takes up some of the travel in the handles, so that you can compress the cleco with less movement from your hands. Like anything, it means that some of the rarely-used, larger clecos such as 1/4 clecos will have tighter clearance, but for the majority of spring loaded clecos, this will be a nice improvement in an already very comfortable tool.

We have ordered a limited run of the taller press pieces to start. We have no idea how many of the thousands of orders will want to take part in this, but we can order more with short turn around. 

In order to take advantage of this update, please use Paypal and send $2.50 to cover the cost of each piece and first class shipping. Because it is hard to send the piece in a small envelope, we have to charge this per piece, if you want to get more than one piece. You can paypal the amount to christopher.braun@ gmail.com, with your shipping address and quantity requested. When the pieces are ready in approximately 20 days, we will send them promptly your way. They are very easy to switch out. 

We would love to send it out for free, but it is not necessary for the operation of the tool, and we make very little money on the tool as it is. It is very expensive to produce this tool in the US and we just thought that this would be a nice way to provide customer service to those who have already bought the tool, rather than having you buy a new tool to get the change. But, if you want another new tool, I'm not stopping you. ;) This change will make it even faster and more comfortable. 

So, if you would like the new piece, paypal us $2.50 per piece requested, and we will send them out when the order arrives from our supplier. The piece looks exactly like the current piece, just taller. 

Thank you, and we appreciate your support. And no, there will be no parts sent out for free and no shipping discounts. Sorry.

Happy Building, 

Christopher

CLECALL FEATURED IN NOVEMBER EAA SPORT AVIATION MAGAZINE!!!

10/29/2014

 

Backorder on individual orders is cleared! Aircraft Spruce backorder will be cleared Monday 10/27! We are finally caught up!

10/26/2014

 
We appreciate the amazing support and enthusiasm that we have gotten over this tool! We also appreciate the patience that everyone has shown in waiting for their orders to be filled! We hope you enjoy them. Keep an eye out, Clecall is almost done with our second tool in development....one that you are sure to be very excited about. One of the most common tools in the aviation world, and, once again, a pain to use! Not for long. 

Shipping Update for Our Customers who bought through this website!

10/17/2014

 
We hope that everyone is enjoying their new Clecall Cleco Pliers! As of today, 10/17/2014, there are only 45 orders left from this website to fulfill. Many of those orders have 2-4 pliers per order. Our target shipping date of 10/15, saw most of the orders shipped, but due to a delay with our CNC operator, we fell a couple of days behind schedule. We appreciate your patience and understanding, and should have the remainder of orders shipped out by Tues 21st and Wednesday 22nd. We have been up day and night assembling pliers and putting out fires, so please hang in there with us, as we are almost to the point of catching up. Please call us if you have any questions about your order. 

Thank you!

Christopher Braun
<<Previous

    Archives

    April 2015
    January 2015
    December 2014
    November 2014
    October 2014
    September 2014

    Categories

    All

    Picture

    RSS Feed

Clecall Upright Cleco Pliers - Patent Pending
© Clecall™ 2021  All Rights Reserved
© Upright Cleco Pliers™ 2021  All Rights Reserved
© The World's Lightest and Most Comfortable Cleco Pliers™ 2021  All Rights Reserved